MAPAL will use AMB Stuttgart 2026 to present new precision-tooling technologies, turnkey manufacturing solutions and application-focused machining concepts for automotive, general machining and aerospace applications.

From 15 to 19 September 2026, MAPAL will exhibit at AMB in Stuttgart, Germany, in Hall 1, Stand C11, with a 390 m² exhibition area. According to MAPAL, its presentation will focus on product innovations, its turnkey offering and machining solutions for strategic components in its key sectors.

AMB 2026 itself will take place at Messe Stuttgart from 15–19 September 2026. The exhibition covers areas including machine tools and manufacturing systems, precision tools, measuring technology and quality assurance, and software and digitalisation.

MAPAL’s Focus at AMB 2026

MAPAL says its 2026/2027 innovations are intended to address manufacturing requirements around productivity, process reliability and adaptability.

Jacek Kruszynski, Chief Technology Officer at MAPAL, says that users increasingly expect manufacturing solutions that combine cost-effectiveness and process reliability with the ability to adapt to different requirements. MAPAL says AMB will provide an opportunity to present its latest developments and engage with customers and partners.

Two technologies are particularly prominent in MAPAL’s AMB 2026 announcement:

• EA Performance System for fine boring
• Second-generation MEGA-Deep-Drill-Alu

The company will also present its approach to turnkey manufacturing solutions and component-specific machining.

---

EA Performance System: Fine Boring from 10 to 19 mm

One of MAPAL’s key product highlights at AMB 2026 is its new EA Performance System for fine boring.

According to MAPAL, the system is being presented for the first time for the 10–19 mm diameter range, with adjustment using one setting screw.

MAPAL states that this configuration is intended to reduce the effort required for setting the fine-boring tool while maintaining the precision and process reliability required for the application.

Why the development is relevant

Fine boring is used where controlled and precise bore machining is required. Tool adjustment is therefore an important part of the machining process.

MAPAL’s new system focuses specifically on simplifying this adjustment in the 10–19 mm diameter range.

The company describes the EA Performance System as combining simple adjustment with high precision and says that the single-setting-screw concept reduces setup effort.

For visitors interested in precision boring technology, this will be one of the main MAPAL developments to examine at AMB 2026.

---

Second-Generation MEGA-Deep-Drill-Alu

MAPAL will also showcase the second generation of its MEGA-Deep-Drill-Alu.

The deep-drilling tool has been developed for machining large drilling depths in aluminium.

MAPAL says the new version combines:

• Optimised geometry
• A high-performance cooling system
• A tailored cutting-material concept

The company states that the design is intended to support reliable machining of different aluminium alloys.

MAPAL’s AMB information also states that the second-generation MEGA-Deep-Drill-Alu will enter the standard range from September 2026 in length versions from 15×D to 40×D, with diameters from 3 to 16 mm depending on the respective length.

Addressing deep-hole machining requirements

MAPAL says the new drill is designed to address typical challenges associated with deep-hole drilling, including:

• Process stability
• Secure chip evacuation
• High feed rates

The company describes the product as offering high material versatility for aluminium machining.

These statements represent MAPAL’s description of the product and its intended capabilities; Machina Today is not independently testing or validating those performance claims.

---

From Tooling to Turnkey Manufacturing

Another major part of MAPAL’s AMB 2026 presentation is its turnkey manufacturing approach.

MAPAL says it supports customers beyond the supply of individual cutting tools and can take responsibility for the wider manufacturing process.

According to the company’s AMB announcement, this can include:

1. Process analysis
2. Process design
3. Tool supply
4. Setting fixtures
5. Simulation
6. Programming
7. Production support

MAPAL says visitors at AMB will be able to see how it approaches complete project planning through to a production-ready process. The company states that such project planning can be completed within 12 to 14 weeks.

The 12–14 week figure is therefore presented here as a MAPAL-stated timeframe, rather than as an independently verified industry benchmark.

---

Component-Focused Manufacturing Solutions

MAPAL says its AMB presentation will focus on the machining requirements of individual components rather than presenting technologies in isolation.

The company plans to show representative solutions for applications in:

Automotive

MAPAL identifies the automotive sector among the application areas represented at its AMB booth.

General Machining

General machining is another area covered by MAPAL’s AMB presentation, with the company planning to demonstrate solutions based on specific component requirements.

Aerospace

MAPAL will also present solutions for aerospace applications. Aerospace is identified by the company as one of the sectors represented at its AMB 2026 booth.

MAPAL’s current website also identifies aerospace, e-mobility and machine engineering among its technology and industry areas.

---

Why AMB 2026 Matters for the Cutting-Tool Industry

AMB is one of the major international exhibitions dedicated to metalworking.

Messe Stuttgart describes AMB as an international exhibition for metalworking and says the event brings together manufacturers and technology providers across areas including machine tools, precision tools, measurement and quality assurance, and software and digitalisation.

The 2026 edition will take place across 10 exhibition halls, with Messe Stuttgart describing the event as a major meeting point for the metalworking industry.

For precision-tool manufacturers such as MAPAL, this creates an opportunity to present new tooling technologies directly to manufacturers, machining specialists and other industry professionals.

---

What to Watch at MAPAL’s Booth

For visitors planning their AMB 2026 agenda, MAPAL’s official announcement identifies several areas worth following.

1. EA Performance System

The new fine-boring system is being presented for the first time in the 10–19 mm diameter range, using a single setting screw for diameter adjustment.

2. MEGA-Deep-Drill-Alu — Second Generation

The new deep drill is designed for large drilling depths in aluminium and combines optimised geometry, high-performance cooling and a tailored cutting-material concept.

3. Turnkey Manufacturing

MAPAL will demonstrate its approach covering process analysis, design, tooling, setting fixtures, simulation, programming and production support.

4. Component-Specific Solutions

The company’s AMB presentation will include representative applications from automotive, general machining and aerospace.

---

MAPAL at AMB 2026: Event Details

Detail	Information
Event	AMB 2026
Dates	15–19 September 2026
Location	Messe Stuttgart, Germany
MAPAL Hall	Hall 1
MAPAL Stand	C11
MAPAL Exhibition Area	390 m²
Key Product Highlight	EA Performance System
Fine-Boring Range Highlight	10–19 mm
Deep-Drilling Highlight	2nd-generation MEGA-Deep-Drill-Alu
Key Application Areas	Automotive, general machining, aerospace
Focus	Precision tooling, machining solutions and turnkey manufacturing

MAPAL confirms the 390 m² area, Hall 1, Stand C11 and the product highlights in its official AMB announcement.

Messe Stuttgart independently confirms the AMB dates and venue.

---

Frequently Asked Questions

When is MAPAL exhibiting at AMB 2026?

MAPAL will exhibit at AMB Stuttgart from 15 to 19 September 2026.

Where is MAPAL located at AMB 2026?

MAPAL will be in Hall 1, Stand C11 at Messe Stuttgart.

What will MAPAL showcase at AMB 2026?

MAPAL will present product innovations including the EA Performance System for fine boring and the second generation of the MEGA-Deep-Drill-Alu, alongside turnkey manufacturing solutions.

What is new about the EA Performance System?

MAPAL says the EA Performance System is being presented for the first time for fine-boring tools in the 10–19 mm diameter range, with adjustment using one setting screw.

What is the MEGA-Deep-Drill-Alu designed for?

The second-generation MEGA-Deep-Drill-Alu has been developed for deep-hole machining in aluminium. MAPAL says it combines optimised geometry, high-performance cooling and a tailored cutting-material concept.

Which industries will MAPAL target at AMB?

MAPAL says its exhibition will include representative solutions for automotive, general machining and aerospace applications.

Does MAPAL offer turnkey manufacturing solutions?

Yes. MAPAL states that its turnkey approach can cover process analysis and design, tool and setting-fixture supply, simulation, programming and production support.

---

Machina Today Analysis

MAPAL’s AMB 2026 announcement reflects a broader focus on process-oriented manufacturing solutions, rather than presenting cutting tools as standalone products.

The two highlighted technologies address different machining requirements: the EA Performance System focuses on fine boring in the 10–19 mm diameter range, while the second-generation MEGA-Deep-Drill-Alu targets deep-hole machining in aluminium.

At the same time, MAPAL’s turnkey offering places emphasis on supporting the wider manufacturing process — from analysis and design through tooling, simulation and production support.

For manufacturers visiting AMB, the combination of precision tooling + application-specific solutions + process support will make MAPAL’s booth one to watch during the September exhibition.

Machina Today will continue tracking the latest product launches, manufacturing technologies and exhibitor developments ahead of AMB Stuttgart 2026.

---